DG187AP Overview
The DG181 thru DG191 series of analog gates consist of 2 or 4 N-channel junction-type field-effect transistors (JFET) designed to function as electronic switches. Level-shifting drivers enable low-level inputs (0.8V to 2V) to control the ON-OFF state of each switch. The driver is designed to provide a turn-off speed which is faster than turn-on speed, so that break-before-make action is achieved when switching from...
DG187AP Key Features
- Constant ON-Resistance for Signals to ±10V (DG182, DG1
- ±15V Power Supplies
- <2nA Leakage from Signal Channel in Both ON and OFF States
- TTL, DTL, RTL Direct Drive patibility
- tON, tOFF <150ns, Break-Before-Make Action
- Cross-Talk and Open Switch Isolation >50dB at 10MHz (75Ω Load)
- ONE AND TWO CHANNEL SPDT AND SPST CIRCUIT CONFIGURATION
- TWO CHANNEL DPST CIRCUIT CONFIGURATION
